DSC PC580 - V2.3 Instrukcja Instalacji Strona 8
- Strona / 32
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
6
2.4 Alarms Displayed While Armed Option
You can disable the display of alarms on the keypad when the system is armed. The
display of alarms is enabled by default. To disable the display of alarms when the
system is armed, turn off section [6], option [5]:
1. Enter [*][8][Installer’s code]
2. Enter [000] to go to keypad programming
3. To turn the display of alarms on or off, enter section [6].
4. Turn option [5] on or off:
[5] ON = Alarms not displayed while system is armed
OFF = Alarms are always displayed while system is armed
5. When you are finished, press [#] to exit.
2.5 Emergency (Fire, Auxiliary, Panic) Key Options
You can enable or disable the Fire, Auxiliary and Panic keys at each keypad. These
keys are enabled by default. Please see your system’s
Installation Manual
for more
information on these keys and their options. To turn any of the emergency keys on or
off on the keypad:
1. Enter [*][8][Installer’s code]
2. Enter [000] to go to keypad programming
3. Enter section [7].
4. To turn the emergency key options on or off, press [1], [2], or [3]:
[1] ON = Fire key enabled
OFF = Fire key disabled
[2] ON = Auxiliary key enabled
OFF = Auxiliary key disabled
[3] ON = Panic key enabled
OFF = Panic key disabled
5. When you are finished, press [#] to exit.
2.6 Door Chime Options
You can program the LCD5501Z32-433 keypad to sound a tone when any zone is
opened or closed. There are two parts to the LCD5501Z32-433 door chime
programming:
• Program if the LCD5501Z32-433 will chime when zones are opened and/or closed.
• Program the type of sound the LCD5501Z32-433 will make when an individual zone is
opened or closed.
For the door chime feature to work, you will also need to turn on the Door Chime
attribute for each zone that will trigger the chime. This programming is done in the
control panel software. Refer to your control panel’s
Installation Manual
for more
information.
Door Chime on Zone Openings/Closings
You can program each LCD5501Z32-433 keypad to sound a door chime when zones are
opened and/or when they are closed. By default, LCD5501Z32-433 keypads are
programmed to sound door chimes on both zone openings and closings.
To change the door chime opening/closing settings, at each LCD5501Z32-433
keypad:
K E Y P A D P R O G R A M M I N G
- Installation Manual 1
- Table of Contents 2
- Introduction 3
- Installation 4
- 1.4 Applying Power 5
- 1.5 Enrolling the Keypad 5
- 1.6 Downloading 6
- Keypad Programming 7
- 2.6 Door Chime Options 8
- Door Chime Sounds 9
- Receiver Programming 10
- Enroll Wireless keys 11
- 3.4 Identified Wireless Keys 12
- Command Output Activation 12
- 3.5 Deleting Wireless Devices 13
- Other Programming 14
- 4.4 RF Jam Detect Zone 15
- Testing & Mounting 17
- Installation Sheet 18
- Additional Notes 19
- Troubleshooting 20
- Programming Worksheets 21
- Zone Serial Numbers 23
- Wireless Key Serial Numbers 24
- Default = 00Default = 00 25
- Default = 00 25
- A P P E N D I X A 28
- LIMITED WARRANTY 29
- WARNING Please Read Carefully 30
- Toronto, Canada 32
Powiązane produkty i podręczniki dla Oprogramowanie DSC PC580 - V2.3
Oprogramowanie DSC PC 580 Instrukcja Użytkownika
(17 strony)
(17 strony)
Oprogramowanie DSC PC 580 Instrukcja Instalacji
(32 strony)
(32 strony)
Mitel M7310N manuals
Owner’s manuals and user’s guides for Telephones Mitel M7310N.
We providing 4 pdf manuals Mitel M7310N for download free by document types: User Manual
Komentarze do niniejszej Instrukcji