DSC ESCORT558O Instrukcja Obsługi Pobierz pdf (Strona 15)

Dimming

The Dimming feature allows you to increase or decrease the brightness of an item, usually a light.

NOTE: This feature will only be enabled on items capable of dimming.

Items which have this feature enabled will have extra options in the Item Control menu. Only

items with the Dimming feature enabled will have these options. If such an item is selected in

the Item Control menu the system will announce the menu above with the addition of the

following:

Item Control Menu Function

“To increase, press [3].”“To increase, press [3].”

“To increase, press [3].” Increases the brightness.

“To decrease, press [4].”“To decrease, press [4].”

“To decrease, press [4].” Decreases the brightness.

NOTE: The Escort5580 allows [F], [A], and [P] alarms to be sent by holding down [1],

[2], or [3], respectively, for two seconds. For this reason, do not hold down the [3] key

to increase the brightness of an item. Press the [3] key in short intervals instead.

6.3 Mode Control

Modes give you control over groups of items. When a mode is turned ON, each of the items

will automatically operate according to the schedule(s) assigned to them. For example, your

installer may have programmed one of the modes as a {Vacation mode} that you can turn on

to activate premises lights while you are away.

Your installer should provide you with a list of the items that have been assigned to each

mode (if any modes are used). Your system has a maximum of 8 modes available.

To operate items according to modes, you must access the Mode Control menu.

To do this, first access the Home Automation menu, then press [2]. The system will prompt

you with the following:

Mode Control Menu Function

“{Mode XX} is OFF/ON.”“{Mode XX} is OFF/ON.”

“{Mode XX} is OFF/ON.” Indicates whether the current mode is ON or

OFF.

“To change, press [1].”“To change, press [1].”

“To change, press [1].” Press [1] to toggle the mode ON or OFF.

“For the next Mode, press [2].”“For the next Mode, press [2].”

“For the next Mode, press [2].” Press [2] to advance to the next mode.

“For the previous Mode, press [3].”“For the previous Mode, press [3].”

“For the previous Mode, press [3].” Press [3] to skip back to the previous mode.

“To exit, press [#].”“To exit, press [#].”

“To exit, press [#].” Press [#] to return to the Home Automation

menu.

Use this menu to select any mode you want, and to turn it ON/OFF.

6.4 Global Item Control

Certain devices controlled by your system may be defined by your installer as Global Items.

These items can be controlled together with a single command. For example, all of the lights

on the premises may be all programmed as Global Items. You could then turn all the lights on

or off at once. Your installer will inform you which automation items on your system are Global

Items.

H O M E A U T O M A T I O N

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

DSC ESCORT558O Instrukcja Obsługi Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa DSC ESCORT558O