DSC PC3OOO Instrukcja Instalacji Pobierz pdf (Strona 33)

PC3000 Version 7.51

[25] New Master Code (Access Code Number 1) Page 19

Default

1 2 3 4 Enter 4 digits from 0 to 9.

Do not enter [Q] or [#].

[26] Downloading Access Code Page 19

Default

3 0 3 0 Enter 4 digits from 0 to 9.

Do not enter [Q] or [#].

[27] Communicator Format Options Page 19

Default

1 1st Telephone Number

2nd Telephone Number

Enter one HEX digit from [0] to [D] from list for each phone number from list:

[0] Silent Knight/Ademco slow, 10 BPS (1400 Hz handshake) 3/1 and 4/1, 4/2 non extended format

[1] Sescoa, Franklin, DCI, Vertex, 20 BPS (2300 Hz handshake) 3/1 and 4/1, 4/2 non extended format

[2] Silent Knight fast, 20 BPS (1400 Hz handshake) 3/1 and 4/1, 4/2 non extended format

[3] Radionics, (2300/1400 Hz* handshake) 3/1 and 4/2 non extended format

[4] Radionics, (2300/1400 Hz* handshake) 3/1 and 4/2 non extended with parity format

[5] Sescoa super speed

[6] Not used

[7] Not used

[8] Silent Knight/Ademco slow, 10 BPS (1400 Hz handshake) 3/1 extended format

[9] Sescoa, Franklin, DCI, Vertex, 20 BPS (2300 Hz handshake) 3/1 extended format

[A] Silent Knight fast, 20 BPS (1400 Hz handshake) 3/1 extended format

[B] Radionics, (2300/1400 Hz* handshake) 3/1 extended format

[C] Radionics, (2300/1400 Hz* handshake) 3/1 extended with parity format

[D] Sescoa super speed (with identified openings/closings)

*See section [19] for Radionics Handshake Option

[28] Programmable Input and Output Options Page 20

Note: If a printer is attached to the panel, both [0] for the 1st digit and [C] for the 2nd digit must be entered.

Default

2 Auxiliary Input Zone Enter 0, 1, 2 or 3 for options below 0,1, 2 and 3 are the

(Normally open, momentary [0] Printer attached only valid entries

closure to “Aux +”) [1] Silent 24 hour input

[2] Audible 24 hour input

[3] Momentary key arming

2 Programmable Output Enter 1 to F for options below 1 through F are

(A 50 mA switch to ground.) [1] Ground start pulse the only valid entries

Note: A relay must be used to [2] Utility output no access code

obtain more current. [3] Utility output any access code

[4] Utility output Group A access code

[5] Utility output Group B access code

[6] Keypad buzzer follow mode

[7] System status (arm/disarm) output

If only using first telephone number, enter

same digit into 2nd phone number.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

DSC PC3OOO Instrukcja Instalacji Strona 33

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa DSC PC3OOO