DSC LCD5501Z Instrukcja Użytkownika Pobierz pdf (Strona 3)

3

Programming the Keypad

There are several programming options avail-

able for the LCD5501Z keypad. These are

described below. Record all your programming

choices in the programming worksheets in-

cluded in this manual.

Programming the LCD5501Z is similar to pro-

gramming the rest of the system. When you are

in the LCD5501Z programming sections, the

keypad will display which options are turned on

along the top of the display. To turn an option on

or off, press the number corresponding to the

option on the number pad. The numbers of the

options that are currently turned ON will be

displayed.

For example, if options 1 and 2 are on, the

display will look like:

For information on programming the rest of your

security system, please refer to your system’s

Installation Manual

.

Function Key Options

The function keys are programed in sections [1]

to [5]. By default, the 5 function keys on the

keypad are programmed as Stay Arm (03), Away

Arm (04), Chime (06), Sensor Reset (14) and

Quick Exit (16). You can change the function of

each key on every keypad. Please see your

system’s

Installation Manual

for instructions on

programming the keys, and a complete list of all

the function key options available for your

system.

Clock Options

The LCD5501Z will display the current time after

30 seconds of no key presses. To set the correct

time and date for the system, please refer to

your system’s

Instruction Manual

. You can

change how the keypad displays the time with

the following options. To change the clock

options:

1. Enter [*][8][Installer’s code]

2. Enter [000] to go to keypad programming

3. Enter section [6] to go to clock options.

4. To turn any of the options on or off, press [1],

[2], or [3]:

NOTE: If the Time does not display on keypad

option is selected, make sure that the Keypad

displays time when zones are open option is also

selected.

[1] ON = Time displays on keypad

OFF = Time does not display on

keypad

[2] ON = Clock display is in AM/PM format

(e.g. 08:00 AM)

OFF = Clock display is in 24-hour

format

(e.g. 20:00)

[3] ON = Keypad does not display time

when zones are open

OFF = Keypad displays time when

zones are open

5. When you are finished programming the clock

options, press [#] to exit.

WWW.DIYALARMFORUM.COM

1 2 3 4 5 6 7 8

Komentarze do niniejszej Instrukcji

Brak uwag