DSC Power608 Dokumentacja Pobierz pdf (Strona 12)

KEYPADVCOMMANDS

[14] [✱]

[7] [2] Reset (Command Output Option #2): As

described above.

[15] General Voice Prompt Help: This feature can only be

programmed if both the Escort5580 and the PC5928

Audio Matrix module are being used. The intercoms will

perform a Help page. The user must then press the Page/

Answer button on any intercom station to begin the help

session with the Escort.

[16] [

✱]

[0] Quick Exit: As described above.

[17] [

✱]

[1] Reactivate Stay/Away Zones

[18] Identified Voice Prompt Help: Can only be programmed

if both the Escort5580 and the PC5928 Audio Matrix

module are being used. The Escort will begin a help

session from the intercom station closest to the keypad.

You must also program PC5928 Section [802], subsection

[14] “Keypad Port Assignments.” For more information,

please refer to the PC5928 Installation Manual.

This function key cannot be programmed for

PC55XX LED keypads with software version 1.0.

[19] [✱]

[7] [3] Command Output Option #3

[21] [

✱]

[7] [4] Command Output Option #4

3.6 Features Available for the LCD5500Z

These features are only available for LCD5500Z keypads with

zone inputs:

Automatic Scrolling of Alarms in Memory

The LCD5500Z keypad allows automatic scrolling through

alarms in memory while the keypad is idle. This feature, if

enabled, will override the clock display. This option can be

programmed in LCD programming section [66], option [4].

24 Hour Time Display Option

The LCD5500Z can be programmed to display time using a 24-

hour clock, instead of a 12-hour, am/pm clock. This option can

be programmed in LCD programming section [66], option [3].

Keypad Zones

See section 2.12 “Keypad Zones”.

Viewing Troubles While Armed

See section 3.4 “[✱][2] Trouble Display” for information on how

to view troubles.

Backlighting Boost

The LCD5500Z and PC5508Z zone input keypads will provide

extra number pad lighting when any key is pressed. The

backlighting boost will last for an additional 30 seconds after

the last keypress.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

DSC Power608 Dokumentacja Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa DSC Power608