DSC PTK5507 Instrukcja Użytkownika Strona 4

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 32
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 3
Always ensure you obtain the latest version of the User Guide. Updated versions of this User Guide are available by con-
tacting your distributor.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and/or injury, observe the following:
Do not spill any type of liquid on the equipment.
Do not attempt to service this product yourself. Opening or removing the cover may expose you to dangerous volt-
age or other risk. Refer servicing to qualified service personnel. Never open the device yourself.
Do not touch the equipment and its connected cables during an electrical storm; there may be a risk of electric
shock.
Do not use the Alarm System to report a gas leak if the system is near a leak.
REGULAR MAINTENANCE AND TROUBLESHOOTING
Keep your PTK5507 Touchscreen keypad in optimal condition by following all the instructions that are included within
this manual and/or marked on the product.
HANDLING PRECAUTIONS
Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
CLEANING
If the display surface is contaminated, breathe on the surface and gently wipe it with a soft, dry cloth. If still not
completely clean, moisten cloth with isopropyl alcohol.
Do not use abrasives, water, thinners, solvents or aerosol cleaners (spray polish), any aromatic solvents, ketones etc.
that may enter through holes in the PTK5507 Touchscreen keypad and cause damage.
TROUBLESHOOTING
Occasionally, you may have a problem with your system. If this happens, your Alarm Controller will identify the problem
and display an error message. Refer to the provided list when you see an error message on the display. If additional help
is required, contact your distributor for service.
WARNING: This equipment, PTK5507 Touchscreen keypad shall be installed and used within an environment that
provides the pollution degree max 2 and over-voltages category II non-hazardous locations, indoor only. It is designed
to be installed, serviced and/or repaired by service persons only [service person is defined as a person having the appro-
priate technical training and experience necessary to be aware of hazards to which that person may be exposed in per-
forming a task and of measures to minimize the risks to that person or other persons]. There are no parts replaceable by
the end-user
within this equipment
WARNING: Never obstruct the access to the Alarm controller to which this equipment is connected. These safety
instructions should not prevent you from contacting the distributor and/or the manufacturer to obtain any further clar-
ification and/or answers to your concerns.
Przeglądanie stron 3
1 2 3 4 5 6 7 8 9 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag