DSC PTK5507 Instrukcja Użytkownika Strona 7

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 32
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 6
3
Figure 3 - Controls & Indicators
Time/Date
Trouble Menu
Command Output
Keypad/
Security Function
s
Emergency Key
Partition Status
System Status
Stay Arm
Global Arm
Zone Status
Photo Frame
Away Arm
SD card slot
Ready
LED
Armed
LED
Home/
Reset
Trouble
LED
AC
LED
Arming and Disarming the System
Stay Arm (Arming the Perimeter)
Ask your alarm company if this function is available on your system.
Stay arming bypasses the interior protection (i.e., motion sensors) and arms the perimeter of the system
(i.e., doors and windows). Close all sensors (i.e., stop motion and close doors). The Ready (
) indica-
tor should be on. Press the Stay Arm button and/or enter your Access Code and do not leave the prem-
ises (if your installer has programmed this button). During exit delay, the Armed (
) and Ready ( )
indicators turn on to visually indicate that the system is arming.
When the exit delay expires, the Ready LED turns off , the Armed LED remains on and the keypad
stops sounding to indicate that the alarm system is armed.
NOTE: For SIA FAR listed panels, the Stay Arming exit delay will be twice as long as the Away
Arming exit delay.
Silent Exit Delay
If the system is armed using the Stay Arm button or using the "No Entry" Arming method
([][9][access code]), the audible progress annunciation (keypad buzzer) is silenced and the exit time
doubled for that exit period only (CP-01 versions only).
NOTE: For non CP-01 versions, Standard exit time is used.
When Stay Arm is selected from the Home screen:
• The display indicates “Exit Delay in Progress,” and the pre-programmed exit delay begins.
The Armed LED Indicator turns on.
NOTE: If Quick Arm is not enabled by the installer, then a numerical keypad is displayed (see
Figure 4). Enter a valid access code to proceed.
Przeglądanie stron 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag