DSC Power832 Security System PC5016 Dokumentacja Strona 28
- Strona / 44
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
P R O G R A M D E S C R I P T I O N S
28
5.8 Downloading
Downloading allows programming of the entire control panel via a computer, modem and telephone line.
All functions and features, changes and status, such as trouble conditions and open zones can be viewed
or programmed by downloading.
When power is applied to the panel downloading will be enabled for 6 hours. This will allow
you to perform downloading without having to do any keypad programming.
If the Downloading Answer
option is enabled (or during the first 6 hours after power up) the panel will
answer incoming calls for downloading provided the following conditions occur:
1.The panel hears one or two rings then misses a ring.
2.At this point the panel will start a timer.
3.If the panel hears another ring before the Answering Machine Double Call Timer
expires it will answer
on the first ring of the second call.
The panel will immediately go on line and begin the download process unless the Call Back option is
enabled. If enabled, the panel and computer will both hang up. The panel will then call the Download
Computer Telephone Number and wait for the computer to answer. Once the computer answers
downloading will begin.
If User Enable DLS Window is enabled the user can turn the downloading feature on for 6 hours through
the [
][6] keypad command. After 6 hours the panel will not answer incoming calls unless Downloading
Answer is enabled
(See Section 3.4 “[ ] Commands, [ ][6] User Functions”).
The Download Access Code
and Panel Identifier Code
are for security and proper identification. Both
the panel and the computer file should have the same information programmed before attempting to
download.
For more information refer to the Download Manual included with the computer software.
Downloading Answer ..................................... Section [401], Option [1]
User Enable DLS Window ............................. Section [401], Option [2]
Call Back ........................................................ Section [401], Option [3]
Answering Machine Double Call Timer ......... Section [405]
Download Computer Telephone Number ...... Section [402]
Download Access Code ................................ Section [403]
Panel Identifier ............................................... Section [404]
5.9 Partitions/Zone Assignment
A partition is a defined area which will operate independent of another area of the system. The panel can
be divided into two partitions. For example, in an office/warehouse installation it may be necessary to limit
warehouse employees from accessing the office and office employees from accessing the warehouse.
Any zone can be assigned to either, or both partitions. Any Access Code can be assigned to work on
either, or both partitions
(See Section 3.4 “[ ] Commands, [ ][5] Programming Access Codes”).
Common Zones are zones assigned to both partitions. A common zone will only be armed when both
partitions are armed and will be disarmed when either partition is disarmed.
Keypads can be assigned to work on either partition or can be assigned for Global operation
(See Section
2.6 “Keypad Assignment”).
Each partition can be programmed to report using a different Account Number
(See Section 5.5
“Communicator - Account Numbers”).
Some of the Programmable Output options are also selectable by Partition
(See Section 5.10 “PGM
Outputs”).
The Partition 2 Enable option must be programmed before Partition 2 will operate.
At default zones 1 through 8 are assigned to Partition 1. If additional zones are being used or the
application requires two Partitions zones must be enabled to operate on the correct Partition.
Zones programmed as Null must be removed from both Partitions (See Section 5.1 “Zone
Definition).
Partition 2 is Enabled..................................... Section [201], Option [1]
Partition 1 Zone Assignments ....................... Section [202] to [205]
Partition 2 Zone Assignments ....................... Section [206] to [209]
- System Introduction 1
- 1.2 Additional Devices 2
- 1.3 Out of the Box 3
- Getting Started 4
- 2.6 Keypad Assignment 7
- 2.7 Enable Supervision 8
- 2.8 Removing Modules 8
- 2.9 Zone Wiring 9
- G E T T I N G S T A R T E D 10
- Keypad Commands 11
- 3.3 Auto Bypass 12
- 3.4 [ ] Commands 12
- K E Y P A D C O M M A N D S 13
- 3.5 Function Keys 17
- How to Program 19
- 4.5 Viewing Programming 20
- Program Descriptions 21
- 5.2 Zone Attributes 22
- 5.3 Communicator - Dialing 23
- 5.8 Downloading 28
- 5.10 PGM Outputs 29
- 5.12 Siren Supervision 31
- 5.13 Test Transmission 31
- 5.15 Entry/Exit Delay Options 32
- 5.16 Event Buffer 32
- 5.17 Swinger Shutdown 33
- 5.18 Transmission Delay 33
- 5.19 Keypad Backlighting 33
- 5.21 Automatic Arming 33
- 5.22 Keypad Lockout 34
- 5.23 Keypad Blanking 34
- 5.24 Loop Response 34
- 5.25 Keypad Tampers 34
- 5.26 Escort5580 Module 35
- 5.27 On-Site Printer 35
- 5.28 Audio Interface Module 35
- 5.29 Default (Factory) 35
- 5.30 Installer Lockout 36
- 5.31 Walk Test (Installer) 36
- Auto Arming sequence 37
- (See Section 5.13 “Test 37
- Transmission”) 37
- Contact ID 38
- SIA Format 39
- Hookup Diagram 40
- LIMITED WARRANTY 41
- WARNING Please Read Carefully 41
- Installation 43
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa DSC Power832 Security System PC5016
(10 strony)
(36 strony)
(6 strony)
(32 strony)
(32 strony)
(55 strony)
(25 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji