DSC Power8 PC5OO5 Instrukcja Instalacji Pobierz pdf (Strona 23)

K E Y P A D C O M M A N D S

[18] Identified Voice Prompt Help

This feature can only be programmed if both the Escort5580 and the PC5928 Audio Matrix module are being used.

When the function key is pressed, the Escort will begin a help session from the intercom station programmed as

closest to the keypad. In order for this option to function, you must program PC5928 Section [802], subsection

[14] “Keypad Port Assignments.” For more information, please refer to the PC5928 Installation Manual.

Note: This function key cannot be programmed for PC55XXZ LED keypads with software version 1.0.

[19] - [✱]+[2]+[3] Command Output 3

[21] - [✱]+[2]+[4] Command Output 4

Function Keys [19] and [21] provide the user with a simple method of activating an output programmed as

Command Output Option 3 or 4.

3.6 Global and Partition Keypad Operation

A global keypad will not display any information (the trouble LED will light if a trouble condition is present) until a partition

is selected. To select a partition the user must press and hold the [1] key for Partition 1 or the [2] key for Partition 2 for

two seconds. The keypad will then display the status of the selected partition and allow normal operation.

A Partition keypad will display the status of the Partition for which it has been programmed. A user with access

to both partitions may temporarily assign the keypad to the other partition to gain access. To do this the user

must first press and hold the [#] key for two seconds. The keypad will go blank. The user must then press and

hold the [1] key for Partition 1 or the [2] key for Partition 2 for two seconds. The keypad will then display the

status of the selected partition and allow normal access.

3.7 Features Available for the LCD5500Z

These features are only available for LCD5500Z keypads with zone inputs:

Automatic Scrolling of Alarms in Memory

The LCD5500Z keypad allows automatic scrolling through alarms in memory while the keypad is idle. This

feature, if enabled, will override the clock display. This option can be programmed in LCD programming section

[66], option [4].

24 Hour Time Display Option

The LCD5500Z can be programmed to display time using a 24- hour clock, instead of a 12-hour, a.m./p.m.

clock. This option can be programmed in LCD programming section [66], option [3].

Keypad Zones

See section 2.10 “Keypad Zones”.

Viewing Troubles While Armed

See section 3.4 “[✱][2] Trouble Display” for information on how to view troubles.

Backlighting Boost (available for all zone input keypads)

The LCD5500Z, LCD5501Z and PC55XXZ zone input keypads will provide extra number pad lighting when any key

is pressed. The backlighting boost will last for an additional 30 seconds after the last keypress.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Brak uwag

DSC Power8 PC5OO5 Instrukcja Instalacji Strona 23